SLAM 3.0 motion algorithm
The robot is equipped with ultrasonic, infrared and contact sensors. The main navigation device of the robot is a high-precision gyroscope. The SLAM 3.0 control algorithm is based on real-time map development and positioning using information from the gyroscope and other sensors.
Map development technology
During the cleaning process, the robot builds a map of the room with millimeter accuracy and recognizes its position in the room.
Real-time planning
In order to adapt to a variety of applications, the R30 is equipped with an advanced real-time graphics algorithm that easily handles complex scenarios. For example, when the furniture locations in the apartment change during cleaning, the real-time algorithm will identify the correct path.
Cleaning zone separation
First, the space is divided into a series of small blocks of 4x4 m, which are cleaned according to their type. Next, the robot cleans along the walls and objects. Thus, a greater degree of coverage is achieved.
Mobile App
The robot vacuum is controlled using a convenient mobile application via any available WI-Fi network, which allows to control the robot from any place where there is the Internet.
Local cleaning
If you do not need to clean en entire room, but only a certain spot, then you can use the local cleaning mode, in which the vacuum cleaner will clean a circle of1.5 m in diameter.
Cleaning along the corners
The cleaning algorithm pays special attention to the areas along the walls and in the corners.
Quick control
The application allows you to visually monitor the progress of cleaning and to see which areas of the apartment have been cleaned and which have not yet been cleaned.
High-tech internal parts
The R30 is equipped with a brushless motor that creates a vacuum of 1200 Pa, two independent side brushes and a 2500 mAh lithium battery. The operating time of the device is up to 120 minutes, the cleaning area is up to 150 m2.
The main brush with a wide range
The robot is equipped with a V-shaped spiral brush, which, together with the side brushes, provides a 38 cm dust collection width.
Vacuum of 1200 Pa
The robot's brushless motor creates a vacuum of 1200 Pa, which is enough to collect not only small , but also large debris.
Wet cleaning
The robot is equipped with a floor polisher with a water tank, and microfiber cloths. The tank has a water lock that prevents water leaks when the robot is on the base.
Cleaning under low furniture
The height of the robot vacuum allows it to easily move under furniture up to 8 cm high, which expands the possibilities for the most complete cleaning.
Anti-confusion system
The robot's software has a built-in algorithm that has been specially developed for situations of entanglement in a wire. Therefore, the R30 is able to free its wheels and brushes from the wound wires.
Soft touch
Infrared proximity sensors help the robot to detect obstacles and touch them gently, without the risk of damage or overturning
Height drop sensors
Sensors on the lower part of the robot notice the edge of the surface in time and prevent the robot from falling.
Automatic charging
The robot remembers the location of its charging base and is able to return to it, even if it is in another room.