Lidar scans space 360 degrees 2160 times per second
Conventional lidar robot vacuum models scan space no more than 1,800 times/s. The ATVEL R6 has a higher scanning frequency and thus provides more accurate mapping.
Efficient SLAM-motion algorithm
At this time SLAM algorithm (simultaneous localization and mapping) is the most effective solution for indoor navigation. SLAM allows to build maps with high speed and accuracy, assess the situation in real time, adjust the route, react to changes, and cover the entire territory without gaps.
A lithium battery is built with high-energy density cells
The battery capacity is 6400 mAh. Operation time on a single charge - up to 4 hours.
Automatic planning and cleaning zones setting
A convenient application allows to differentiate the cleaning zones in the room and plan the cleaning sequence.
Mobile App
The app allows to control and monitor the robot remotely.
Manual setting of cleaning zones
You can set up a custom cleaning zone of 10 points, as well as limit cleaning zones using a virtual wall.
Cleaning by squares
Dividing the cleaning area by a grid into squares of 1. 5 x1. 5 m in combination with repeated passage allows you to avoid gaps and achieve better cleaning efficiency than with the traditional "zigzag"cleaning method.
Additional smart sensors
In addition to the lidar, the robot vacuum cleaner has in its arsenal:
- Height drop sensors
- Odometer (distance sensors);
- Optical sensors;
- Sensors for obstacles and thresholds.
Resuming cleaning
If the battery charge is exhausted, the robot will go to the charging station in automatic mode, and after charging, it will resume cleaning from the stop point.
Easy passage of obstacles
Due to the special design of the chassis, the robot easily climbs on carpets and overcomes thresholds.
Dry and wet cleaning at the same time
A mop with a water tank allows for wet cleaning for up to 60 minutes without water tank refills. At the same time, the robot simultaneously performs dry cleaning.
Efficient brushless motor
The robot vacuum is equipped with a new brushless motor from the Japanese company NIDEC. The motor provides a vacuum level of up to 2000 Pa, a high suction force and a low noise level.
- The vacuum in the "quiet mode" is 850 Pa
- The vacuum in the "standard mode" is 1400 Pa
- The vacuum in the "maximum mode" is 2000 Pa
An effective system of brushes
A roller brush in the floating head and 2 side brushes provide a reliable pick-up and retention of dust.
7 motors in one device
The robot has 7 motors to drive all the moving parts, which work synchronously and ensure balanced and continuous operation.